f.
GAS ASSISTED TILT
Check the manual valve for tightness.
Excessive
tilt
up
load
Clean and lubricate: (See base
shop manual).
Loose
I
I
9
Faulty gas assisted tilt. Replace:
(P.
13-1 thru. 13-5).
I
Does not hold
t
Tilt lever is in TILT position. Turn to RUN position.
Faulty gas assisted tilt.
Replace:
(P.
13-1 thru. 13-5).
g.
POWER TRIM/TILT
Power TriMilt
Does
Not
Move
Turn "TROUBLESHOOTING" on page
Check the motor sound.
Sounds
Does not sound
Loose
Tight
Faulty power trim/tilt assembly.
Power TriMilt
Does
Not
Hold
Tight
1
Faulty power trim/tilt assembly.
I
24
5
To Next Page
