BF40AoBF50A
SHIFT
UNIT DISASSEMBLY
1) Remove the two screws and remove the lock plate.
2 Remove the two screws and remove the spring
guide, spring, shift arm pin and roller.
3)
Remove the shift gear and
plate.
bushing from the shift
[3]
SCRE
[4]
LOCK PLATE
IW
(2),
/
PI
SPRING.
[11
SHIFT ARM PIN
\
\
151
\
SHIFT GEAR
[91
SCRE1.1
BUSHING
[81
ROLLER
[7]
SHIFT FRAME
STEERING BRACKET
1) Remove the 12 mm lock nut, 12 mm hex. nut, 14 mm
wave washer and distance collar.
131
Remove the 12 x
80
mm hex bolt and 12 mm washer.
Remove the steering bracket.
Remove the 12 mm thrust washer.
Remove the steering handle bushings if necessary.
Replace with new ones when the steering handle
busings are removed.
STEERING BRACKET
12
mm
191
12
mm
LOCK NUT
12
mm
WASHER
[81
14
mm
WAVE WA
[51
12
x
80
mm
171
HEX. BOLT
12
mm
THRUST
STEERING HANDLE
BUSHING
(2)
1
Do
not
reuse.
1
15-8
To Next Page
