Reserve fuel consumption meter
When the 1st (
E) segment of the fuel gauge
starts flashing, the odometer, tripmeter, fuel
mileage meter and fuel consumption meter
switches to the reserve fuel consumption.
You should refill the tank as soon as possible.
• Flashes from “0.0” L or gal.
u When the amount of consumed fuel is
more than 2.1 L (0.55 US gal, 0.46 Imp
gal) the display blinks faster.
u If you change the display to odometer,
tripmeter, fuel mileage meter and fuel
consumption meter and so on (P.
22) ,
it will automatically return to the reserve
fuel consumption display if the buttons
are not pressed for about 10 seconds.
After refuelling more than the reserve
amount, the display returns to normal when
your motorcycle travel 0.1 km (0.06 mile).
20161220114015_32MJED100_eng_BOOK Page 28 Tuesday, December 20 2016 11:43:47 JST
Operation Guide
25
Continued
Reserve fuel consumption meter
To Next Page
Loading...
