4 Activating/deactivating of tripmeter A,
average fuel mileage and fuel
consumption automatic reset mode:
You can activate or deactivate the automatic
reset mode by refuelling after 1st (E) segment
of the fuel gauge starts flashing. Deactivation
is initially set.
a
Press
SEL
button to select “
” (activate) or
“ ” (deactivate) in the automatic reset
mode.
b
Press
SET
button. The activation/
deactivation of automatic reset mode is set,
and then the display moves to the setting of
HISS indicator (HISS indicator comes on).
5 Setting of HISS indicator:
You can select the blink or off the HISS indicator.
a
Press
SEL
button to select “ ” (blinks) or
“ ” (off).
b
Press
SET
button. The HISS indicator setting
is set, and then the display moves to the
changing of speed and mileage unit.
20161220114015_32MJED100_eng_BOOK Page 32 Tuesday, December 20 2016 11:43:47 JST
Operation Guide
29
Continued
To Next Page
Loading...
