Honda F810 - Engine Oil Change

34
Engine oil change
Oil capacity:
[TE type]
[FE, GE and DE types]
OIL FILLER CAP
(TE type)
FILLER NECK
UPPER LIMIT
DRAIN BOLT
Change the oil when the engine is warm to assure rapid and complete
draining.
Remove the oil filler cap and drain bolt and drain the oil into a
suitable container.
Retighten the drain bolt securely.
Hold the engine level to the ground. Refill with the recommended oil
(P. 13) to the top of the filler neck.
Reinstall the oil filler cap securely.
Remove the attachment from the front of the tiller, if it is installed.
Retract the stand and tilt the tiller forward.
Place a suitable container under the oil filler cap.
Remove the oil filler cap and drain the engine oil.
Hold the tiller level to the ground. Refill with the recommended oil
(P.13) to the top of the filler neck.
Reinstall the oil filler cap securely.
1.1L(1.2USqt,1.0lmpqt)
3.
1.
2.
3.
1.
2.
4.
4.
5.
6.