Continued
151
uuGauges and Driver Information InterfaceuDriver Information Interface
■
The Driver Attention Monitor resets when:
• The power mode is set to VEHICLE OFF.
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function:
• The vehicle must be traveling above 25 mph (40 km/h).
• The electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2 Lane Keeping Assist System (LKAS) P. 517
• The condition of the road is poor, e.g. the surface is unpaved or bumpy.
• It is windy.
• The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select Tactile and Audible
Alert
*1
/Tactile And Audible Alert
*2
, Tactile Alert, or Off
*1
/OFF
*2
.
2 Customized Features P. 158, 372
*1: Models with color audio
*2: Models with Display Audio
1For the Driver Attention Monitor to function:
The bars on the driver information interface remain
grayed out unless the Driver Attention Monitor is
functioning.
21 INSIGHT-31TXM6200.book 151 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
