20-minute mode
1. After starting the engine, repeat step 1 in 10-
minute mode.
2. The transmitter emits two rapid beeps and sends a
signal to extend the idling time. After extending the
idling time, the transmitter emits another sound
twice, and the each indicator is shown on the
display.
NOTE
• Note that you cannot return the remote engine
starter system to the 10-minute mode after changing
to the 20-minute mode by operating the transmitter.
• The engine cannot start for 20 minutes even though
you stop the engine within 10 minutes after
exceeding the time to the 20-minute mode.
2
ENGINE
BUTTON
LOCK/START
BUTTON
ENGINE
RUNNING
INDICATOR
REMAINING
IDLING TIME
1
Starting the Engine
To Next Page
Loading...
