Honda Remote Engine Starter System - Replacing the Transmitter Battery

© 2012 American Honda Motor Co., Inc. - All Rights Reserved. 35
B127751H
Transmitter Battery Replacement
1. Touch the metal part of the screwdriver to any metal
part of the vehicle to discharge any static electricity.
2. Remove the battery cover.
3. Remove the old battery.
4. Install new lithium battery (CR2032) into the
transmitter with the positive (+) mark toward the
battery cover.
5. Install the battery cover.
6. Push the lock button on the transmitter. The buzzer
should sound indicating that the battery is installed
properly.
Battery cover
Coin
Lithium battery
CR2032
Soft cloth
Soft cloth
Small flat-tip
screwdriver
Discharge any
static electricity.
Perchlorate material special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate