Honda Remote Engine Starter System - Starting the Engine with the Remote System; 10-Minute Engine Start Mode

© 2012 American Honda Motor Co., Inc. - All Rights Reserved. 13
B127121H
Starting the Engine
10-minute mode
1. Push the engine button on the transmitter for
1 second or less, then push in the lock/start button
within 2 seconds.
2. The transmitter emits two rapid beeps and sends a
signal to start the engine.
3. When received the answerback signal from the
vehicle, the transmitter emits two rapid beeps, and
the reception indicator is shown on the display.
4. The checking indicator is blinking until the engine
start is confirmed.
5. After starting the engine, the transmitter emits
another sound, and the each indicator is shown on
the display.
1
ENGINE
BUTTON
LOCK/
START
BUTTON
ENGINE
RUNNING
INDICATOR
CHECKING
INDICATOR
REMAINING
IDLING TIME
IN-CAR
TEMPERATURE
*1
*1 Only on vehicles equipped with the automatic climate control.
This indicator is displayed for some vehicles among them.
RECEPTION
INDICATOR
Blinking
*1