Owner’s Manual
Read and save these
instructions.
For help please visit
resideo.com
RLV3120
Non-programmable
Thermostat
C
Application
This thermostat can be used to control an electric heating system such as a
baseboard heater or a convector.
The thermostat CANNOT be used with:
• a resistive load under 0.83 A
• a resistive load over 8.3 A
• a system driven by a contactor or a relay (inductive load)
• a fan-forced heating system (e.g. : fan-forced convector)
• a central heating system.
WARNING Electrical Shock Hazard.
This thermostat is a line voltage control (120240 Volts). Do not install it if you
are not completely familiar with house wiring. If handled improperly, there is risk
of electric shock hazard, which may cause serious injury or death.
Do you need assistance? We are here to help.
Call 18004681502 for wiring assistance before returning the
thermostat to the store.
To Next Page
Need help?
General
