Application
This thermostat can be used to control an electric heating system such as a baseboard heater or a convector.
The thermostat CANNOT be used with:
a resistive load under 0.83 A
a resistive load over 8.3 A
a system driven by a contactor or a relay (inductive load)
a fan-forced heating system (e.g. : fan-forced convector)
a central heating system.
WARNING Electrical Shock Hazard.
This thermostat is a line voltage control (120-240 Volts). Do not install it if you are not completely familiar with house wiring. If
handled improperly, there is risk of electric shock hazard, which may cause serious injury or death.
Do you need assistance? We are here to help.
Call 1-800-468-1502 for wiring assistance before returning the thermostat to the store.
NO MERCURY
ATTENTION: MERCURY RECYCLING NOTICE
This product does not contain mercury. However, this product may replace a product that contains mercury. Mercury and
products containing mercury should not be discarded in household trash.
For more information on how and where to properly recycle a thermostat containing mercury in the United States, please refer to
the Thermostat Recycling Corporation at www.thermostat-recycle.org.
For mercury thermostat recycling in Canada, please refer to Switch the Stat at www.switchthestat.ca
SUPPLIED PARTS
One (1) thermostat
Two (2) 6-32 mounting screws
Two (2) solderless connectors
Temperature display and setting
To Next Page
Loading...
Need help?
General
