To Next PageTo Next PageWhat to do if my Honeywell Home Thermostat displayed temperature is wrong?
If the displayed temperature is incorrect, check for the following conditions: * Ensure the thermostat is not exposed to air drafts. * Verify that the sticker on the thermostat’s screen has been removed. * Confirm the thermostat is not located near or above a heat source, such as a light dimmer.
Why does my Honeywell Home RLV3120 display disappear and reappear?
The display might disappear and reappear because the thermal protection device on the heater has temporarily opened. This can occur if the heater is obstructed by furniture or a curtain, leading to overheating, or if the heater’s thermal protection device is overly sensitive.
General| Backlight | No |
|---|---|
| Power Source | Hardwired |
| Color | White |
| Application | Electric Baseboard Heater |
| Voltage | 120/240 VAC |
| Display | LCD |
| Temperature Range | 40°F to 85°F (5°C to 30°C) |
| Mounting | Wall |
| Stages | 1 |
Details on where the thermostat can be used for heating control.
Lists components included with the thermostat for installation.
Explains how to view and change temperature settings on the thermostat.
Instructions for detaching the thermostat's front cover.
Guidance on connecting the thermostat wires to the heating system.
Specific instructions for connecting the thermostat using a 2-wire setup.
Specific instructions for connecting the thermostat using a 4-wire setup.
Steps to reattach the thermostat's front cover after wiring.
How to change the display unit for temperature (e.g., °C or °F).
Guidance for resolving common operational issues and error conditions.
Technical details and performance parameters of the thermostat.
Information on the product's limited warranty coverage and terms.
