Honeywell Home RLV3150 User Manual

USER GUIDE
33-00209ES-05
RLV3150
ELECTRONIC THERMOSTAT
APPLICATION
This thermostat is designed to control
an electric heating system such as a
baseboard heater, a convector or a fan-
forced heater.
The thermostat cannot be used with the
following:
• a resistive load under 2 A
• a resistive load over 12.5 A
• systems driven by a contactor or a
relay (inductive load)
• central heating systems
Supplied Parts
• One (1) thermostat
• Two (2) 6-32 mounting screws
• Two (2) solderless connectors
CONTROLS AND DISPLAY
Fig. 1.
Backlit Screen
Up button
Temperature
Heating intensity
indicator (the image
disappears when
heating is off)
Appears when the
setpoint is displayed
Appears when the
thermostat is configured
for a fan-forced heater
(see page 3)
The settings are locked
Down button

Honeywell Home RLV3150 Specifications

General

Display	Digital
Voltage	24V
Stages	1
Backlight	No
Temperature Range	40°F to 90°F
Power Source	Battery

Summary

Application

Controls and Display

Installation Guidelines

Mount the Thermostat

Wiring

Configuration Settings

Temperature Display and Setting

Setup Menu

In Case of Difficulty

Specifications

1-Year Limited Warranty

Customer Assistance