EasyManuals Logo

Honeywell 4850DR Imaging Guide

Honeywell 4850DR
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
CB Scheme
Certified to CB Scheme IEC 60950-1, Second Edition.
Laser Safety Statement
If the following label is attached to your product, it indicates the product contains a laser:
This device has been tested in accordance with and complies with IEC60825-1:2007 and 21 CFR 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 630-680nM.
Caution: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Solids and Water Protection
The Granit 4850DR has a rating of IP40, immunity of foreign particles and dripping water.
Warning
To reduce the possibility of heat-related injuries, avoid touching sections of the scanner that feel warm.
LASER LIGHT - DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
RAYONNEMENT LASER NE PAS REGARDER DANS LE FAISCEAU. APPAREIL À
LASER DE CLASSE 2. MAX. 1mW :630-680 nm. IEC 60825-1: 2007. Complies with
21 CFR 1040.10 and 1040.11 except for deviations pursuant To Laser Notice No. 50,
dated June 24, 2007.
!

Other manuals for Honeywell 4850DR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell 4850DR and is the answer not in the manual?

Honeywell 4850DR Specifications

General IconGeneral
BrandHoneywell
Model4850DR
CategoryScanner
LanguageEnglish

Related product manuals