Honeywell Accentic 026423 - Triggering Hold-up Alarm (Disarming); Clearing a Hold-up Alarm

29
6.4.5.3 Trigger hold-up alarm with disarming
possible with door release
possible without door release
Enter the hold-up code
0....9
Hold the data carrier in the reading range
With authorization: Hold-up alarm is triggered and the system is disarmed
ID
Activate the "disarm" key
6.4.5.4 Clear hold-up alarm:
A) Activate the corresponding control function
no.
possible
Activate the "F" key
F
0....9
3
Enter the function/macro number
Confirm with "OK"
Enter PIN
0....9
and
or
Hold the data carrier in the reading range
ID
or
B) Press the button in the EU conventional.
Acknowledgement: Authorization No authorization
Disarmed
(yellow)
Ready
(green)
5 sec.
Dis-
armed
Armed
Operating Instructions mifare/DESFire EV1 reader "Accentic" with/without keypad