Honeywell Accentic 026423 User Manual

30
6.4.6 Activate Control functions/macros
Activate the "F" key
F
0....9
3
Enter the function/macro number
Confirm with "OK"
Enter PIN
0....9
and
or
Hold the data carrier in the reading range
ID
possible
Only if the data carrier/PIN is authorized for arming/disarming, the LED "Alarm" will be
activated.
Quick function:
Function triggering immediately after pressing the function button ”F”).
No PIN, no data carrier and no function number required.
Activate the "F" key
Confirm with "OK"
Function will be performed
Function
possible
F
3
6.4.7 Info function
The ”Info” function shows the current status of the zone (armed / disarmed / alarm).
It is always possible to activate this function .with a PIN or data carrier
Activate the " " key
Enter PIN
or
Hold the data carrier in the reading range
i
ID
i
0....9
Indication:
System is disarmed System is armed
Disarmed
(yellow)
Ready
(green)
5 sec. 5 sec.
5 sec. Off
Alarm
(red)
Lights up in case
of alarm
Lights up in case
of alarm
Operating Instructions mifare/DESFire EV1 reader "Accentic" with/without keypad

Honeywell Accentic 026423 Specifications

General

Brand	Honeywell
Model	Accentic 026423
Category	Card Reader
Language	English