Honeywell BENDIXKing APEX EDGE Series User Manual

Honeywell Bendix/King KFD 840 Primary Flight Display
Getting Started KFD 840 PG PN 7450-0840-01
2-12 Rev C May 28, 2010
© Honeywell International Inc. Do not copy without express permission of Honeywell
Press the right knob to cycle through the displayed parameters.
Figure 2-9 KFD Flight Settings Page Part 2
When the desired selection is highlighted, turn the right
knob to change the setting of the highlighted
parameter.
To save the setting change press the SAVE function
below the display. The SAVE annunciation will be
removed indicating the setting has been saved.
To exit the KFD Flight Settings page after saving the
settings press the RETURN function key.
To exit the KFD Flight Settings page without saving
press the RETURN function key.

Honeywell BENDIXKing APEX EDGE Series Specifications

General

Brand	Honeywell
Model	BENDIXKing APEX EDGE Series
Category	Avionics Display
Language	English