Honeywell Bendix/King KFD 840 Primary Flight Display
Checklist Area KFD 840 PG PN 7450-0840-01
8-2 Rev C May 28, 2010
© Honeywell International Inc. Do not copy without express permission of Honeywell
Press the CHK LST select button, which is now labeled CHK LST, to
select either CHK ON/CHK OFF. If CHK ON is selected the Check
Lists will be displayed on the upper right corner of the display, to the
right of the ADI as shown in the figure below.
Figure 8-2 Checklist Menu - CHK ON
Press the right knob four times until CHK LST is highlighted. Turn
the knob to move through the checklist pages as shown in the figure
below.
To Next Page
Loading...
