Honeywell Bendix/King KFD 840 Primary Flight Display
Checklist Area KFD 840 PG PN 7450-0840-01
8-4 Rev C May 28, 2010
© Honeywell International Inc. Do not copy without express permission of Honeywell
4. At the maintenance mode screen depress the #3 (ACCEPT)
button on the bottom middle of the screen.
5. Depress the left hand knob twice to get into the Checklist mode.
6. Depress button #1 (READ). The files on the SD-card will be
displayed in the Checklist box.
Figure 8-4 Check Maintenance Mode
7. Rotate the right-hand knob to SELECT the desired checklist, and
then press the OPEN button.
8. Use the N.LIST or P.LIST, (Next or Previous) button to review
the pages in the file. Make sure they have not been corrupted by
the transfer and read correctly.
To Next Page
Loading...
