Honeywell BENDIXKing APEX EDGE Series - Page 85

Honeywell Bendix/King KFD 840 Primary Flight Display
KFD 840 PG PN 7450-0840-01 Appendix
Rev C May 28, 2010 11-5
© Honeywell International Inc. Do not copy without express permission of Honeywell
ITEM
RESOL-
UTION
INPUT
VALUE
RANGE
UNITS
CONFIGURATION
AP Out
Type
--
BANK,
TURN
--
VOR
Offset
0.1
0-180.0
DEG
LOC
Offset
1
-100 TO
+100
%FULL
SCALE
GS
OFFSET
1
-100 TO
+100
%FULL
SCALE
MPH
Mode
-
ON. OFF
--
FD Pitch
Gain
1
1
10-2560
--
FD Roll
Gain
1
1
+/-999
--
FD Pitch
Filt
1
1
10–2560
--
FD Roll
Filt
1
1
+/-999
--
NOTE 1: Only on P/N 8350-0840-06 or higher
Each of the items noted above can be selected using the right
control knob and adjusted to the parameters listed. If the installer
alters an item, the category description is highlighted in yellow to
indicate a change.
Once the appropriate settings have been entered, the data can be
saved by selecting the “SAVE” button at the bottom of the screen.
Pressing the “SAVE” button will store the data permanently into the
internal memory of the KFD 840 and the configuration module.