Honeywell
10 73020212j © Elster GmbH | All rights reserved. Subject to modification
1.1 Intended use
CAUTION!
Responsibility for the use of the meter in terms of suitability,
intended use and the corrosion resistance of the materials to the
medium is solely in the hands of the operator.
INFORMATION!
The manufacturer shall not be liable for damage caused by
improper or inappropriate use.
1.2 Approvals and certifications
Marking / Declaration of conformity*
The manufacturer certifies conformity with the declaration
of conformity and by attaching the marking.
The measuring instrument meets the statutory
requirements of the relevant EU Directives.
Comprehensive information on the applicable Directives
and Standards, as well as recognized certifications, is
contained in the declaration of conformity.
The EU declaration of conformity is included in the delivery
and is also available to download at www.docuthek.com.
See chapter 8. Approvals and Annex A – Standards
and Norms for details of other approvals and
ATEX/UK-EX
The industrial diaphragm gas meter is suitable for use in
Zone 1 or Zone 2/0 hazardous areas and is approved with the
following certifications and manufacturer’s declarations:
8000310656 (ATEX-Zone 1) TÜV NORD CERT GmbH
TÜV 13 ATEX 122235 X (ATEX-Zone 2/0) TÜV NORD CERT GmbH
EMA21UKEX0024 (UK-EX) Element Materials Technology
* The marking on the device shall be applicable.
To Next Page
Loading...