EasyManuals Logo

Honeywell CADVR-1008-WD-M User Manual

Honeywell CADVR-1008-WD-M
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
22
Abnormal shutdown
Through the rear panel to shutdown
During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much
as possible to do it. (specially while the DVR recording).
Directly to pull up the power cable of DVR
While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it.
(specially while the DVR recording).
Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the
DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.
4.4 Multi Channel
1/4/8/9/16 preview screen mode switch
4.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on
the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following
table)
Channel picture attention

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell CADVR-1008-WD-M and is the answer not in the manual?

Honeywell CADVR-1008-WD-M Specifications

General IconGeneral
BrandHoneywell
ModelCADVR-1008-WD-M
CategoryDVR
LanguageEnglish

Related product manuals