EasyManua.ls Logo

Honeywell CADVR-1008-WD-M - Network Setup

Honeywell CADVR-1008-WD-M
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
5.3 Network Setup
(1)General Setup
DHCPAfter checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS
server, etc
UPnPCan choose according to the requirement
IP AddressNetwork logic address can according to the requirements set
Subnet MaskServer subnet mask
Default GatewayServer gateway
DNS ServerDNS server addresses
Server PortData port, initial socket for 7777
HTTP Portthe default port for 80. If change, when using IE browser, need to monitor the IP address, adding new
socket. If use IP address to 82, from the original browsing http://192.168.0.19, change for http://192.168.0.19:82.
Handset PortNetwork phones socket, initial socket for eight thousand eight hundred and eighty eight
(2)Dial-UP Setup

Related product manuals