EAGLEHAWK NX CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS
15 EN1Z-1039GE51 R1218
Firmware Update
1. Check the firmware version installed in your EAGLEHAWK NX as follows:
Open COACH NX, go to the Platform/Platform Administration, and check the version of the Niagara Runtime installed in the
EAGLEHAWK NX.
2. Close COACH NX.
3. Get the firmware upgrade package from the CentraLine Partnerweb. At present, this package is contained in
EAGLEHAWKNX-SupportPackage_17July2018.zip.
4. Navigate with Windows Explorer to your installation folder. For version NX 4.4.73.24, the default folder is
c:\CentraLine\CentraLineNX-4.4.73.24
To Next Page
Loading...
