Honeywell CK75 - About the Battery; Charge the Battery

75 Series Mobile Computer User Guide 5
About the Battery
The computers use the following rechargeable Lithium-ion battery packs as their
main power source:
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell
battery may result in damage not covered by the warranty.
About CN75 NI and CN75e NI models
Charge the Battery
Fully charge the battery before using your computer for the first time. You can
charge the battery before or after you install it in the computer. A fully discharged
battery charges in approximately 6 hours.
You can charge the 1000AB02 battery with these accessories:
• DX1 Desktop Base (Model 1002UU01) with Battery Cup Model 1002UC01 and
power supply
• DX2 Dual Base (Model 1002UU02, 1002UU03) with Battery Cup Model
1002UC01 and power supply
• DX4 Quad Base (Model 1002UU04, 1002UU05) with Battery Cup Model
1002UC01 and power supply
You can charge the 1001AB01 battery with these accessories:
Computer Battery Model Part Number Description
CN75
1000AB02
318-043-033 3.7 V, 4000 mAH (14.8 Wh)
CN75e
1000AB02
318-043-033 3.7 V, 4000 mAH (14.8 Wh)
CK75 1001AB01 318-046-031 3.7 V, 5200 mAH (19.2 Wh)
CK75 (Cold Storage) 1001AB01 318-046-032 3.7 V, 5200 mAH (19.2 Wh)
Caution: The battery used in this device may present a fire or chemical burn
hazard if it is mistreated. Do not disassemble it, heat it above 100 °C
(212 °F) or incinerate it. Dispose of used batteries promptly. Keep away
from children.
Warning: Explosion Hazard - Batteries must only be changed or charged in an
area known to be non-hazardous. Use ONLY Honeywell CN75 NI battery
part number 1000AB02.
Avertissement : Risqued’explosion-Les batteries doivent uniquement être
remplacées ou rechargées dans un endroit non dangereux.
Utilisez UNIQUEMENT Honeywell CN75 NI batterie P/N
1000AB02.