46 75 Series Mobile Computer User Guide
Use the Scan Demo App
Use the Scan Demo app to read bar codes, or to test your symbology decode
settings.
1. Tap All Apps > Demos.
2. Swipe left or right on the screen until the Scan Demo app is selected.
The selected application is listed below the turntable.
3. Tap on the center of the box image to open the app.
4. Aim the scanner window at the bar code and press and hold the Scan button.
5. Center the aiming beam over the bar code. When the scanner successfully
scans the bar code, the computer beeps, and the Good Read LED briefly turns
on. A list of bar code information appears.
Note: In the Scan Demo app, not all bar code symbologies are enabled by default. If a bar
code does not scan, the correct symbology may not be enabled.
How to Change the Default Symbology Settings in the App
To enable or disable decoding for specific symbologies:
1. In the Scan Demo app, tap and select Symbology Settings.
2. Tap the box next to a symbology name to enable (check mark) or disable (no
check mark) decoding for that symbology.
3. (Optional) Tap the Symbology name to see and modify additional configuration
settings for the symbology selected.
To Next Page
Loading...
