75 Series Mobile Computer User Guide 45
About the On-Screen Keyboard
If you want to use the on-screen keyboard when you input a new profile name:
1. Tap the profile name field.
2. Tap the keyboard icon in the lower right corner of the screen.
3. Tap the on/off button next to Show input method enable the on-screen
keyboard. You may have to select the add profile icon again.
Delete a Scanning Profile
Open the Internal Scanner profile list. Tap and hold the profile you want to delete,
and then select Delete.
Scan Bar Codes
The internal imager supports omni-directional (360°) bar code scanning. An
aiming beam is provided to help assist with targeting when scanning bar codes.
Note: Before you start scanning bar codes, use the Settings app to enable only the bar code
symbologies that you need. By reducing the active symbology list, you can increase
the scan speed.
1. Point the computer at the bar code. For optimum performance, avoid reflec-
tions by scanning the bar code at a slight angle.
2. Press and hold the Scan button.
3. Center the aiming beam over the bar code. When the scanner successfully
reads the bar code, the computer beeps, and the Good Read LED turns on
briefly. The bar code information is entered into the application in use.
4. Release the Scan button.
To Next Page
Loading...
