75 Series Mobile Computer User Guide 17
Enter Characters on the QWERTY Keypad
You need to use the orange modifier key and the shift key to access all
characters and functions on the QWERTY keypad.
To type a character:
• Press the key for that character.
To type a character or access a function on the overlay:
• Press and then press the key for the character or function.
To only type characters or access functions on the overlay:
• Press to lock the orange modifier key to stay on, and then press the keys
for the characters or functions.
To type a single uppercase letter:
• Press and then the letter key.
To type all uppercase letters:
• Press to turn on Caps Lock, and then press the letter keys.
You can still type orange modifier characters by pressing and then the key for
that character.
To turn off Caps Lock, press .
Enter Characters on the Numeric Keypad
You need to use the orange modifier key and the green modifier key to
access all characters and functions on the Numeric keypad.
To type a character or access a function printed in orange or green on the overlay:
• Press or , and then press the key for the character or function.
To type letters in the upper right corner of a key:
• Press and then press the key one to three times depending on the position
of the letter.
For example, in the upper right corner of the
2 key there are the letters “ABC”:
• To type “c”, press
2 2 2.
•To type “C,” press
1 and then press c 2 2 2.
Note: On the calculator-style keypad, the
2 is replaced by the 8.
To Next Page
Loading...
