75 Series Mobile Computer User Guide 75
Clean the Computer
To keep the computer in good working order, you may need to clean the scanner
window, color camera window, and the touch screen. Clean the windows and the
touch screen as often as needed for the environment in which you are using the
computer. To clean the computer, use one of these recommended cleaning agents:
• Acetic acid, 10% in water
• Ethyl alcohol, 10% in water
• Mild soap solutions
• 5% to no more than 10% bleach or sodium hypochlorite with water
Honeywell recommends that you leave the battery installed and on CK75 models
the SD Card Door installed when you clean the computer as described.
1. Press the Power button to suspend the computer.
2. Dip a clean cloth towel in the cleaning agent and wring out the excess.
3. Wipe off the scanner window, camera lens, and flash area. Do not allow any
abrasive material to touch these surfaces.
4. Wipe dry with a clean, soft, dry cloth.
5. Allow the computer to fully air dry before using again.
Caution: There are no user-serviceable parts inside the main body of the
computer. Opening the computer will void the warranty and may
cause damage to the internal components.
Note: The installation or replacement of the 75 series computer
battery, a microSD card and/or SIM card as described in this user
manual does not void the warranty.
To Next Page
Loading...
