75 Series Mobile Computer User Guide 29
7. Close and latch the microSD card holder and SIM card holder.
8. Close the card access door and install the two screws.
9. Install the battery. Press down firmly on the bottom of the battery, and make
sure that the battery release tab is fully engaged.
10. Attach the handstrap.
11. Press the Power button. Once the computer finishes the power up sequence
and identifies the new card, a set up query appears.
12. Select how you want the microSD card used: Use as portable storage or
Use as internal storage.
13. Tap Next and then Done once the SD card is ready message appears.
Install a MicroSD Card in a CK75
You need a slotted screwdriver to install the microSD card. Format the microSD
card before initial use.
1. Press and hold the Power button, and then select Power off.
2. Remove both ends of the handstrap.
3. Remove the battery (see page 9).
To Next Page
Loading...
