75 Series Mobile Computer User Guide 31
7. Place the microSD card in the holder with the contacts facing away from the
holder.
8. Close and latch the microSD card holder and SIM card holder.
9. Replace the door and secure it with the two screws removed in Step 4.
10. Install the battery. Press down firmly on the bottom of the battery, and make
sure that the battery release latch is fully engaged.
11. Attach the handstrap.
12. Press the Power button. Once the computer finishes the power up sequence
and identifies the new card, a set up query appears.
13. Select how you want the microSD card used: Use as portable storage or
Use as internal storage.
14. Tap Next and then Done once the SD card is ready message appears.
To Next Page
Loading...
