68 75 Series Mobile Computer User Guide
A list of available Bluetooth devices appears.
3. (Optional) If the device you want does not appear in the list, make sure the
device is turned on and set to discoverable, tap , and then tap Refresh.
4. Tap a device on the list to initiate a pairing request.
5. When the pairing request message appears, verify the Bluetooth pairing code is
the same on both devices and then tap Pair.
If the pairing request requires a PIN, enter the PIN and tap OK.
When the device is paired with the computer, the device name appears under
Paired Devices at the top of the list.
6. (Optional) Once paired to a device, you can connect manually to the device.
Tap the paired but unconnected device.
When the computer and paired device are connected, they show as connected
in the list. The status icon changes from to .
• To disconnect a paired device, tap the name of the paired device and then tap OK
when the Disconnect? screen appears.
• To unpair a device, tap the next to the device and then select Forget.
To Next Page
Loading...
