Honeywell CN80 Series - Page 103

CN80 Mobile Computer Series User Guide 93
• Basic Configs include the most common system settings
• System language
• Bluetooth and NFC
• System volume
•Location
•Network
• File downloaded
• Application installation or launch
• Advanced Configs allow you to stage your devices with .xml files
The hotspot on the server device will be named HONEYWELL_WIFI_STAGING.
Note: We recommend starting the server before setting any clients because the clients
require more time and power to scan and search for the hotspot signal if the server is
not created in advance.
Note: To control bandwidth usage, the server side of Wi-Fi Staging has a maximum
limitation of 10 concurrent client connections. If more than 10 client devices attempt
to connect to the server device at the same time, staging of some of those clients will
be delayed until client connections become available as the staging process
progresses.
Basic Configuration
Basic configuration includes the most common system settings.
1. Launch the Wi-Fi Staging app on the server device by tapping Settings >
Honeywell Settings > Wi-Fi Staging.
2. Tap Basic Configs to start the configuration wizard.
3. System language: Tap + to add a language. At least one language must be
added. Tap NEXT.
4. Connection preferences: Enable Bluetooth and/or NFC. They are disabled by
default. Tap NEXT.
5. Sound preferences: Adjust the default volume for each type of audio by
dragging the slider. Tap NEXT.
6. Location setting: Enable the location switch. It is disabled by default. Tap
NEXT.
7. Network & internet: You have the option to set up a network connection if, for
example, you want to register devices to a MDM system or the devices need to
use applications that require network access.
If you do not want to set up a network connection, tap SKIP and proceed to step
9.