Honeywell CN80 Series - About the Scan Status LED

CN80 Mobile Computer Series User Guide 19
3. Choose one of the following options:
• To set the brightness level manually, verify the Adaptive brightness feature
is turned Off, and tap Brightness level. Adjust the slider to set the brightness
level.
• To turn the display screen dark for optimal night viewing, toggle on Dark
Theme.
• To tint your screen amber, turn on Night Light. You can adjust the intensity
once the night light is on.
About the Scan Status LED
The Scan Status LED indicates the read status of the imager when scanning a
barcode. When active, the LED illuminates the outer ring of the front speaker.
Scan Status LED Descriptions
To learn more about how to use and configure the imager engine for scanning, see
Use the Image Engine beginning on page 45.
LED Color Description
Green Good read of a barcode.
Blinking green The data collection engine is processing or starting up.
Red Failure to scan barcode.
Check to make sure you have the correct symbology enabled.
Scan Status LED