CN80 Mobile Computer Series User Guide 101
Optional microSD Card Method
The CN80 comes equipped with a microSD card socket. You can install an upgrade
from a microSD card you insert in the computer.
Important: The Dolphin CN80 must have power for the entire length of the upgrade process or it
could become unstable. Do not attempt to remove the battery during the process.
1. On the CN80, swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Provisioning mode.
3. Tap the toggle button to turn Provisioning mode On.
4. Swipe up from the bottom of the Home screen to access all apps.
5. Tap AutoInstall Settings . Verify Enable AutoInstall is enabled .
6. Press and hold the Power button, and then tap Power off.
7. On your workstation (e.g., laptop, desktop computer), format the microSD card
and create a \honeywell\autoinstall folder on the root of the card.
8. Save the upgrade file in the autoinstall folder.
9. Install the microSD card in the CN80, and then press the Power button.
The computer automatically runs the upgrade found in the autoinstall folder on
the card. The system update screen appears during the upgrade process. When
the upgrade is finished, the lock screen appears.
10. Once installation is complete, turn Provisioning mode Off.
About the Honeywell Upgrader
Use the Honeywell Upgrader app (HUpgrader) to check for and install OTA updates
or view the current OTA version installed on the computer.
How to View the Installed OTA Version
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap HUpgrader to open the Honeywell Updater app. The OTA version
number installed on the computer appears on the screen.
To Next Page
Loading...
