CN80 Mobile Computer Series User Guide 59
6. Select a cellular carrier.
7. Tap Apply and then OK to verify the change.
8. Tap OK again when the “Settings are saved” message appears. Under Current
Config, the active SIM slot appears with the carrier setting you selected.
Activate the Phone
You use a SIM card to activate the phone on your CN80 WWAN model computer
(CN80L1N). You can purchase the micro SIM card from your network provider.
Dolphin CN80 WWAN models includes two SIM card slots (SIM 1 and SIM 2) for
multiple network provider flexibility.
1. Select a network carrier. To learn how, see Add or Switch Between Network
Carriers on page 58.
2. Activate and configure the SIM slot you are installing the card in. To learn how,
see Select a SIM Card Slot.
3. Press and hold the Power button until the options menu appears.
4. Tap Power Off and then OK to verify.
5. Release one end of the hand strap.
6. Slide the battery latch to the right.
Warning: If you have a CN80 NI model certified for use in hazardous
locations, read Important Information on page 8.
To Next Page
Loading...
