110 CN80 Mobile Computer Series User Guide
White Illumination Monochrome Sensor Only
N6603ER Imager Engine Field of View/Resolution
Note: DPI can be calculated based on the following formula:
Horizontal DPI = 832 pixels/width of horizontal field of view (inches)
Vertical DPI = 640 pixels/width of vertical field of view (inches)
EX20 Near/Far Image Engine Reading Distances
The depth of field measurements were taken using these parameters:
• Distances are measured from the front of the engine.
• +23 °C (+73 °F), 0 lux
• Photographic quality codes
Note: Time to Read and Depth of Field are impacted if the barcode symbol is at the edge of
the image.
White Illumination Monochrome Sensor Only
Symbology Near Distance
(in/cm)
Far Distance
(in/cm)
Delta
(in/cm)
5 mil Code 39 4.1 (10.4) 10.9 (27.8) 6.9 (17.4)
10 mil Code 39 3.1 (8.0) 17.6 (44.7) 15.9 (40.0)
100% UPC 2.2 (5.5) 19.9 (50.5) 18.4 (46.8)
20 mil C39 2.4 (6.1) 27.6 (70.2) 21.2 (53.9)
6.7 mil PDF 417 5.3 (13.6) 9.0 (22.9) 3.6 (9.10)
20 mil QR Code 2.1 (5.3) 19.2 (48.7) 17.2 (43.5)
10 mil DataMatrix/Aztec 5.0 (12.7) 10.5 (26.8) 5.5 (14.1)
Focus
Horizontal Field Angle (degrees) 17.6 ±3.5°
Vertical Field Angle (degrees) 13.5 ±3.5°
Symbology Near Distance
(in/cm)
Far Distance
(in/cm)
Delta
(in/cm)
3 mil Code 39 5.91 (15) 13.78 (35) 7.87 (20)
10 mil Code 39 5.91 (15) 45.28 (115) 39.37 (100)
20 mil Code 39 6.30 (16) 82.68 (210) 76.38 (194)
40 mil Code 39 9.84 (25) 122.05 (310) 112.21 (285)
UPC/EAN 100% 5.91 (15) 57.09 (145) 51.18 (130)
To Next Page
Loading...
