Honeywell CN80 Series - Barcode Symbologies Supported; N6603 ER Imager Engine Reading Distances

CN80 Mobile Computer Series User Guide 109
Barcode Symbologies Supported
The computer supports the following barcode symbologies:
Note: To learn about changing the symbology settings, see Change the Scanner Settings on
page 46.
N6603ER Imager Engine Reading Distances
The depth of field measurements were taken using these parameters:
• Distances are measured from the front of the engine.
• +23 °C (+73 °F), 0 lux
• Photographic quality codes
Note: Time to Read and Depth of Field are impacted if the barcode symbol is at the edge of
the image.
1D Symbologies 2D Symbologies Postal Codes
Default Default Default
Codabar Enabled Aztec Code Enabled China Post Disabled
Code 39 Enabled Codablock A Disabled Korean Post Disabled
Code 11 Disabled Codablock F Disabled 2D Postal Settings Disabled
Code 93 Disabled DataMatrix Enabled Australia Post Disabled
Code 128 Enabled DotCode Disabled Info Mail Disabled
ISBT 128 Disabled Grid Matrix Disabled Japan Post Disabled
Composite Disabled HanXin Disabled Canada Post Disabled
Digimarc Disabled Maxicode Disabled Dutch Post (KIX) Disabled
EAN-8 Enabled Micro PDF 417 Disabled Planet Disabled
EAN-13 Enabled PDF 417 Enabled Postnet Disabled
GS1-128 Enabled QR Code Enabled BPO Disabled
GS1 Databar Disabled TLC 39 Disabled UPU Disabled
IATA 2 of 5 Disabled OCR Disabled USPS Disabled
Standard 2 of 5 Disabled
Interviewed 2 of 5 Enabled
Matrix 2 of 5 Disabled
MSI Disabled
Telepen Disabled
Trioptic Code Disabled
UPC/EAN Disabled
UPC-A Enabled
UPC-E Enabled
UPC-E1 Disabled