Honeywell CT3650 - Page 15

15 69-1285—2
Program the First Day
Start b
y
pro
g
rammin
g
the wake time and temperature for one da
y
.
❑ Press and release .
❑ Press until the desired da
y
displa
y
s. (Mon, Tue, Wed, Thu, Fri, Sat, Sun)
❑ Press time or until the desired time shows in the displa
y
.
NOTE: Pro
g
ram times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
❑ Press or until the desired wake temperature displa
y
s.
The setpoint temperature ran
g
e is 40°F to 90°F (4.5°C to 32°C) for heatin
g
and 45°F to 99°F (7°C to 37°C) for coolin
g
.
❑ Press to switch between setpoints.
NOTE: Pro
g
ram times are the same for heatin
g
and coolin
g
.
❑ Press or until the displa
y
shows the desired temperature setpoint.
NOTE: You can pro
g
ram the fan to On or Auto for each pro
g
ram period. Settin
g
Fan to On runs the s
y
stem fan
continuousl
y
in the pro
g
ram periods.
❑ Press until the fan is at the desired settin
g
(On or Auto).
❑ Press , or and repeat these steps for each pro
g
ram period. The first da
y
is now pro
g
rammed.
❑ Repeat each step in Pro
g
ram the First Da
y
for the rest of the week.
NOTE: After the first da
y
is pro
g
rammed,
y
ou can cop
y
that da
y
to an
y
other da
y
usin
g
procedure in Cop
y
a Da
y
.
❑ Press when the entire week is pro
g
rammed.
Wake
Day
Heat/Cool
Settings
Fan
Leave
Return
Sleep
Run
Program