Honeywell DC1010 Instruction Manual

1. Input Change (TC & Linear  RTD)
To change the input type from TC to RTD or RTD to TC，Move a jumper.
For Linear type, it’s same as that of TC.
1) DC1010
2) DC1020/DC1030/1040
* No Calibration or Adjustment Required
While Input Conversion between TC & RTD.
TC
RTD
RTD
TC

Honeywell DC1010 Specifications

General

Control Type	On/Off, PID
Accuracy	±0.25% of span
Operating Temperature	0 to 50°C
Mounting	Panel Mount
Input Type	Thermocouple, RTD, mA, V
Output Type	Relay
Supply Voltage	100-240 VAC
Display	LED
Dimensions	48 x 48 mm
Number of Outputs	Up to 3
Enclosure Rating	IP66
Alarm	Up to 2 alarms