Honeywell DC1010 Instruction Manual

Contents
1. Input Change (TC & Linear  RTD) ......................................................................................3
2. Wiring Distinction between TC& Linear .....................................................................................4
3. Linear Input H/W Setting .........................................................................................................5
4. To view the ANL1, ANH1 parameters. .......................................................................................7
4-1. Unlock the protection.....................................................................................................7
4-2. Show the parameters.....................................................................................................7
4-3. Calibration ....................................................................................................................8
4-4. Procedure of Calibration .................................................................................................9

Honeywell DC1010 Specifications

General

Control Type	On/Off, PID
Accuracy	±0.25% of span
Operating Temperature	0 to 50°C
Mounting	Panel Mount
Input Type	Thermocouple, RTD, mA, V
Output Type	Relay
Supply Voltage	100-240 VAC
Display	LED
Dimensions	48 x 48 mm
Number of Outputs	Up to 3
Enclosure Rating	IP66
Alarm	Up to 2 alarms