1 INTRODUCING THE DCP 100T
The DCP 100T Digital Controller Programmer is a powerful, easy-to-use
1
4
-DIN
setpoint programmer with full PID control capability (complete with Self-Tune and
Pre-Tune facilities). Its standard features are:
• Up to eight programs of up to 16 free-format (e.g. dwell, ramp, join or
end) segments each.
• Facility to join programs to one another in any sequence (maximum
program length 121 segments).
• User can change currently-running program segment.
• Delayed Start of Program facility.
• End of Program relay output.
• Universal input - thermocouple, RTD (Pt100) or DC linear
- user- selectable).
• Universal power supply (90 - 264V ac 50/60Hz).
• Configurable from front panel.
• Comprehensive front panel displays.
• Front panel sealing to NEMA 4 standard.
• Behind-panel depth only 100mm.
Optional features include:
• Remote control and selection of program (plug-in option).
• Up to four Event relay outputs (plug-in option).
• Second control output.
• Recorder output (setpoint or process variable).
• RS485 serial communications.
• User-definable program tag names
• Real Time Clock
1-1
To Next Page
Loading...
