Honeywell Dolphin 60s - Mobile Charger with DB9 Cable Components (60 S-DB9 KIT); Charging the Main Battery

13 - 3
Mobile Charger with DB9 Cable Components (60s-DB9KIT)
DB9 Cable
The mobile charger is provided with a DB9 cable that can be connected to a computer RS232
port.
Power Adapter
The mobile charger is provided with a power adapter cable that can be connected to a vehicle
cigarette lighter outlet.
UL listed power supply
Input: 10V - 30VDC, 0.43A(30V) - 1.28A(10V)
Output: 4.75V - 5.25VDC, 0 - 2A
Verify that the power source is always within the specified range and observe correct
input voltage polarity. An improper input voltage range or reverse polarity could damage
the power conversion circuitry.
Terminal Charging Well
Place the terminal in this well to charge the battery.
Charging the Main Battery
The mobile charger provides power to the Dolphin and allows charging of the main batteries in the
terminal. The main battery charges in 6 hours for the extended battery. The intelligent battery charging
system incorporated into all Dolphin terminals prevents overcharging, which means that terminal may be
seated in the charger indefinitely without damage to the terminal, battery pack, or the charger.
For more information about Honeywell battery packs and how to check battery power levels in your
terminal, refer to Power (page 7-18) and Battery (page 3-10).
Power Adapter
Terminal Charging
Well
DB9 Cable
!