7 - 18
• Storage Card
You can install one memory card in Dolphin terminals (see Installing a SIM Card and/or Memory
Card on page 3-15). If a storage card is installed in the terminal, you can select it in the drop-
down list and see capacity and usage statistics for the card.
Power
Power system settings contains two tabs: Battery and Advanced
Tou ch > Settings > System > Power
Battery Tab
The battery tab displays the power level status of the battery. For detailed information on the main
battery, see Battery on page 7-12.
Advanced Tab
The Advanced tab settings determine power time-outs when running on battery power, external power,
or USB power. To reserve power and extend time between charging cycles, configure the terminal to
automatically enter Suspend Mode (see page 2-12) after a specific number of minutes of inactivity.
On battery power: The terminal is being powered by the battery.
On external power: The terminal is being powered by an external power source, e.g., HomeBase.
To Next Page
Loading...
