8 - 2
Microsoft Connections Application
The Microsoft Connections application sets up multiple network connections to Internet Service
Providers (ISPs) via an external modem.
Do NOT enter connection parameters in the Connections application if:
• you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses
the settings from each radio’s configuration utility to connect. The connections application is used
primarily to setup WAN modem dial up connections.
• you are using Wireless Zero Configuration (WZC). By default, WZC is disabled on Dolphin terminals.
To Access the Connections Application
Tou ch > Settings > Connections > Connections .
Network
Cards
Manage Network card settings, search and add wireless networks, and modify
advanced Wi-Fi settings (e.g., network notifications and connection time-outs).
Icon Description
To Next Page
Loading...
