6 - 12 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Retry Specifies the retry count. 10
RetryDelay Specifies the retry delay. 1000 Enter values in milliseconds.
ShowError Enables and disables error
messages on connecting.
1 0=Disable
1=Enable
ShowStatus Enables and disables the
appearance of status dialog boxes.
1 0=Disabled; status dialogs do not
appear.
1=Enabled; status dialogs do
appear.
StatusMessageDelay Specifies a delay in milliseconds (i.e
1000 is 1 second) to apply after
status and error messages are
displayed.
25 X=Number of milliseconds.
StopOnCriticalError Forces RASMan to stop running
when a critical error occurs.
1 0=Disabled; RASMan continues
to run when a critical error
occurs.
1=Enabled; RASMan stops
running when a critical error
occurs.
TrayIcon Enables or disables the RASMan
tray icon.
1 0=Disable
1=Enable
RASMan Configuration File
RASMan application settings are stored in the Settings section of \IPSM\RASMan.exm. Use EZConfig
Editor (see page 2-2) to change the values in the RASMan.exm file.
Key Description Default
Value
Available Values
To Next Page
Loading...
