Honeywell Dolphin 9900 - Page 88

5 - 10 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
GoodScanFreq Sound frequency used for play a
custom good scan beep.
Note: The Window's "Good Decode"
sound (if defined in the control
panel) takes precedence over
this option.
2749 Variable
Use the up and down arrows to
change the number
OR
Type in the code for the sound
you want.
GoodScanLen Number of milliseconds to play the
sound as specified in GoodScanFreq
key.
50
BadScanFreq Sound frequency used for play a
custom bad scan beep.
Note: The Window's "Bad Decode"
sound (if defined in the control
panel) takes precedence over
this option.
523
BadScanLen Number of milliseconds to play the
sound as specified in BadScanFreq
key.
25
Decode Section
The Decode section specifies decoder settings when using the decoder with ScanWedge.
ScanWedge Entry Description Default
Value
Available Values