Chapter 1 — About the Computer Features
Dolphin CT50 Mobile Computer User Guide 11
Change the Battery Status LED Behavior
You can change the behavior of the Battery status LED if the default
behavior for a charging battery (blinking green) is not acceptable to your
environment.
In addition to the out-of-box Battery status LED behavior, you can
choose:
• Default Battery LED
• No Battery LED
Use the Default Battery LED setting if you want the status LED to turn on
steady amber and then steady green when charging. Select the No
battery LED setting if you want to use the LED as a notification LED for
applications or device management solutions.
1 Tap All Apps ()> Settings > Battery LED.
2 Select one of these options:
• Default Battery LED
• HSM Battery LED (Out-of-Box setting)
• No Battery LED
Default Battery LED Descriptions
Connected to
Power
LED State Description
No Blinking red Battery level is below 15%
No Off Battery level is 15% or more
Yes Steady red Battery level is below 15%
Yes Steady amber Battery level is between 15% and 90%
Yes Steady green Battery level is 90% or more
To Next Page
Loading...
