Honeywell Dolphin CT50 - Create a Custom Profile

Chapter 3 — About the Scanner
Dolphin CT50 Mobile Computer User Guide 39
Symbology Settings
Use the Symbology Settings to enable and disable bar code
symbologies. Tap a symbology to view and modify the symbology
configuration parameters.
Scan to Intent Enable or disable special handling of scan-to-intent bar
codes. Applies to bar codes in one of the following
formats:
‘//’ ACTION
‘//’ ACTION '$' extra-data
Where:
ACTION and extra-data are any string of characters.
Launches an application listening for the intent:
Intent action: “com.honeywell.scantointent.intent.action.”
+ ACTION
Intent extra
“com.honeywell.scantointent.intent.extra.DATA” contains
the remainder of the bar code data after the first ‘$’
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enabled
Launch EZ Config Enable or disable special handling of EZConfig bar
codes. Applies to EZConfig bar codes, which are
encoded with the Aztec symbology and containing
specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_
CONFIG
Enabled
Data Processing Settings (continued)
Setting Description Default
Symbology Settings
Setting Default
Code 128 Enabled
GS1-128 Enabled
Code 39 Enabled
Datamatrix Enabled
UPC-A Enabled