Chapter 6 — Configure the Computer
68 Dolphin CT50 Mobile Computer User Guide
About Bluetooth Communications
The CT50 is Bluetooth-enabled, which allows you connect to other
Bluetooth devices.
You need to turn on the Bluetooth radio before you can discover and
connect to Bluetooth devices. By default, the radio is turned off.
The Bluetooth radio maintains its current state through a system reset. If
you perform a factory data reset, you must recreate pairings to devices.
The System bar icons indicate Bluetooth status.
Connect a Bluetooth Device
To connect to a Bluetooth device, you must enable Bluetooth and then
select the device from a list of discovered devices.
1 Open the Settings app. and tap Bluetooth.
2 If Bluetooth is off, slide the Bluetooth switch on. A list of available
Bluetooth devices appears.
To Next Page
Loading...
